Model Railways

Wills Kits - OO Kits - Waney - Edge Boarding

Pratt Truss Signal Gantry Kit to span two tracks The kit is for the gantry only. Signals not included. Requires Ratio kits 260, 262 or 270 to complete. Moulded plastic parts that require gluing together. Painting and finishing will be also required.

N gauge rerailer This tool helps you put locomotives, wagons and coaches on the track. Simply put it on top of the track and it will get the wheels perfectly aligned with the track. This is a huge time saver. Makes re-railing steam locos and bogie...

Manufacturer description PECO Lineside Kits OO/HO Weighing Machines Pack of 4, 2 different types. Recommended to be used with: All PECO 00/H0 Setrack and Streamline Flexible track systems

Home or Distant (Upper Quadrant) Moulded plastic parts that require gluing together. Painting and finishing will be also required.

Hornby R464 00 Gauge Platform Ramp

WHEEL SCRAPER Simply connect the wires from the brush and scraper directly to your layout power supply and apply them to the driving wheels, one on each side.

Peco PL-26B Passing Contact Switch Black Provides the short burst of current required to operate the PL-10, PL-10E, PL-10W, PL-10WE or PL-11 turnout motors. An invaluable advantage of the PL-26 switch over the 'probe and studs' (PL-17 / PL-18) method...

Allows the PL-50 Switch Module to be extended to any size required.

SINGLE POLE CHANGEOVER SWITCH (ON/ON) Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals.

Base unit for use with the PL-10E Turnout Motor. Fixing screws and full instructions included.

PROBE FOR OPERATING TURNOUT MOTORS A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant...